|
|
2025-2026 Academic Catalog
Course Numbers, Credits, and Descriptions
|
|
Course Numbers
Generally, courses with letter prefixes apply toward degrees and certificates, and courses with 100 and 200 numbers are college transfer courses; those numbered 200 to 299 are considered sophomore-level courses. Be sure to check the degree requirements for the certificate or degree you are seeking to ensure that the course you are taking will be counted.
Courses with a “Z” after the course number indicate a course with common course numbering. These courses have the same number of credits and outcomes, and Oregon Senate Bill 233 requires that they be accepted for transfer at all public colleges and universities in Oregon.
Course Credits
In order to earn an associate’s degree in two years, students should enroll for an average of 16 college-level credits in fall, winter, and spring terms. If college preparatory courses are required, the number of credits each term would increase accordingly. Curriculum and program requirements described in this catalog provide more information on the program or degree of your choice.
Students participating in intercollegiate athletics, must complete and pass at least 12 credit hours each term for eligibility purposes. Students are encouraged to visit with BMCC’s athletic director and/or our coaches for detailed eligibility requirements.
Reading Course Descriptions
Courses offered at BMCC are listed in this section of the catalog. Not every course is offered every term. Use the schedule of classes to determine quarterly course offerings. Students who plan to transfer should consult with their program advisor to ensure course transferability.
HOW TO READ A COURSE DESCRIPTION
Courses are grouped by area of study and listed alphabetically by letter prefix and course number. Courses numbered 100 and above are designed for transfer to other colleges for degree credit.
| Course Number and Title |
Letters and numbers along with the title of the course. Example: AGM131 Agricultural Saftey |
| Course Description |
Briefly summarizes course content |
| Credits, Lecture, Lab |
The number of credits earned by taking the course is noted. Each lecture credit corresponds to one hour of instruction per week. Each lab credit equals 3 hours per week. Each other credit generally refers to 2 hours of class time per credit. |
| Prerequisite |
Prerequisites are listed below course descriptions. A prerequisite is a course that must be completed before enrolling in the selected course. It is important to note prerequisites before registering. |
| Corequisite |
Corequisite is a course that should be completed either before or while attending the selected course. |
Course Designations:
Non-Designated Courses
Courses numbered 100 and above listed in this section of the catalog that have not received a designation mark as outlined above may or may not meet degree requirements or be transferable to other institutions. Questions regarding the transferability of courses should be directed to the Academic Advisor, Director of Enrollment Management, or Chief Academic Officer.
Non-Transfer Courses
Courses with numerical designations less than 100 are not transferable to four-year institutions.
Progression Charts
Math Progression Chart - Progression Chart Math
|
| |
Agriculture
|
| |
-
AGM 131 - Agriculture Safety
Credits - 3 Lecture - 3
A basic course in agricultural safety covering hand and power tools, equipment, chemical and environmental safety. Students will develop safe working habits and identify and correct safety hazards.
Term(s) Offered: Fall
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
AGM 140 - Agriculture Engines
Credits - 3 Lecture - 2 Lab - 1
Students develop a practical understanding of the functioning, operation, and maintenance of the internal combustion engine particularly as it is used in agricultural operations. Single cylinder small gas engines will be used in the lab setting to demonstrate these principles and allow students hands on experience with diagnostics, disassembly, reassembly and repair.
Term(s) Offered: Winter
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
AGM 211 - Agriculture Construction and Surveying
Credits - 3 Lecture - 2 Lab - 1
Surveying, leveling and construction in agricultural applications.
Term(s) Offered: Fall
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
AGM 221 - Metals and Welding
Credits - 3 Lecture - 2 Lab - 1
A basic course in welding using oxyacetylene torches and electric arc welding equipment emphasizing the development of skills and knowledge to safely and effectively accomplish practical repairs and fabrication in agricultural applications.
Term(s) Offered: Winter
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
AGM 240 - Tractors
Credits - 2 Lecture - 1 Lab - 1
This course will acquaint students with agricultural tractors and their systems. Labs will be used extensively to develop student skills in operation and maintenance of tractors. Maneuvering, attaching, detaching, and using implements will be stressed.
Term(s) Offered: Fall
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
AGM 241 - Agriculture Machinery
Credits - 3 Lecture - 2 Lab - 1
Tillage, planting, and harvest equipment used in Eastern Oregon agriculture covering economic factors, operation principles, adjustments, and maintenance of commonly used machines.
Term(s) Offered: Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
AGM 250 - Irrigation Systems Design
Credits - 3 Lecture - 1 Lab - 1 Lecture/Lab - 1
This course will develop a student’s ability to design drip, low pressure and sprinkler irrigation systems. Horticultural and field crop applications will be emphasized. Systems will be explored from pump to output nozzle. Topics for discussion may include soil-water-plant relations, planning a system, plant water requirements, water supply, pumps, hydraulics of irrigation systems, system types and costs.
Term(s) Offered: Winter
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
AGM 251 - Irrigation Systems
Credits - 3 Lecture - 2 Lab - 1
Application of design skills learned in Irrigation Systems Design to actual in-field situations. Field trips will explore different applications of irrigation. Contemporary water issues will be discussed.
Recommended preparation: AGM 250
Term(s) Offered: Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
AGR 101 - Agriculture Orientation
Credits - 1 Lecture - 1
Students will explore successful learning opportunities available at Blue Mountain Community College and develop plans to successfully complete their program of study. Special review will be given to agricultural program areas. Agriculture department instructors and staff will introduce students to financial aid, the library, and the student service center.
Term(s) Offered: Fall
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
AGR 111 - Agriculture Computers
Credits - 3 Lecture - 3
Application of personal microcomputers to farm and ranch situations. Use and evaluation of spread sheets, data bases, and word processing software are covered.
Term(s) Offered: Winter
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
Computer Literacy.
|
| |
-
AGR 200 - Pre-Employment Seminar
Credits - 1 Lecture - 1
A class designed to assist the student in securing employment. Job-hunting techniques, interviewing skills, and the study of job-related responsibilities and problems while advancing in a chosen career are major topics covered. A seminar format is used to encourage student participation.
Term(s) Offered: Winter
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
AGR 210 - Agriculture Accounting
Credits - 4 Lecture - 4
Simulation of ranch and farm record keeping including maintaining payroll, depreciation, cash flow and inventory records. Computer spreadsheets are used to assist in analysis of various farm/ranch enterprises.
Term(s) Offered: Fall
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
AGR 211 - Agriculture Business Management
Credits - 3 Lecture - 3
The study of the four basic assets needed to begin any farm or ranch business. Land, labor, capital, and management are evaluated to ascertain each component’s ability to produce maximum economic returns.
Term(s) Offered: Winter
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
AGR 221 - Agriculture Marketing
Credits - 3 Lecture - 3
The complex agriculture marketing process includes the study of the marketing system, marketing a specific farm commodity, and the importance of organization in marketing agricultural products.
Term(s) Offered: Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
AGR 226 - Agriculture Issues
Credits - 3 Lecture - 3
This course covers current topics causing change in the agricultural industry. Students may research and report on trends as diverse as animal rights, chemicals and foods, land use, water rights, government subsidies, and others. Working alone or with partners, teams will discuss and make presentations demonstrating leadership, decision-making, creativity, and conflict resolution.
Term(s) Offered: Fall
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees. Meets the Human Relations requirement.
|
| |
-
AGR 280 - Cooperative Work Experience
Credits - 1-8
Offered to agriculture students to work on the job in various agricultural fields to gain elective credits from BMCC. Also required in conjunction with several courses in our program.
Term(s) Offered: Fall, Winter, Spring, Summer
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
AGR 290 - Independent Project
Credits - 2 Lecture - 2
AGR 290 is an independent study course for students to research, design, and complete a Precision Agriculture-related GIS project such as soil sampling, crop scouting, and remote sensing with UAS (drones). Students will collect, analyze, and report real-world data. This class serves as a capstone project for the Precision Agriculture degree. Projects must be approved and supervised by the instructor.
Prerequisites: ET 114 , CSS 220 , CSS 221 , UAS 110 , CSS 211 , and a Remote Pilot Certificate (if using UAS to collect data)
Term(s) Offered: Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
AGR 296 - Production Problems
Credits - 4 Lecture - 4
Students will select an area related to agriculture and do a feasibility study or an economic analysis. Currently published figures will be used. The report will contain all information needed to make a justifiable and cost beneficial decision.
Term(s) Offered: Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
ANS 117 - Animal Ultrasound
Credits - 1 Lecture - 1
This course provides lectures and hands-on laboratories for agriculture students who wish to become more competent at abdominal ultrasonography and carcass value ultrasound. It will provide a solid foundation in ultrasound physics, anatomy, and a large number of case examples. In addition, this course allows hands-on experience for the student.
Term(s) Offered: Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
ANS 121 - Animal Science
Credits - 4 Lecture - 3 Lab - 1
This course is designed to expose students to the various components of animal science and animal husbandry in the modern livestock industry through discussion, lectures, and hands-on laboratory experiences.
Term(s) Offered: Winter
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
ANS 122 - Animal Science
Credits - 3 Lecture - 2 Lab - 1
Approved practices in the modern livestock industry. Students gain technical knowledge in livestock reproduction, genetics, and modern breeds. Emphasis is placed upon performing skills commonly used by successful ranchers.
Recommended preparation: ANS 121
Term(s) Offered: Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
ANS 198 - Special Studies
Credits - 1-3
Designed to provide interested and capable students with the opportunity to study special topics in the animal sciences.
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
ANS 201 - Introduction to Equine Science
Credits - 3 Lecture - 2 Lab - 1
This course is an introductory course in equine science. The course emphasizes the effects of natural selection on natural and domesticated horses, selection of horses by breed and evaluation of conformation, tack selection and care, nutrition and feed rations, basic handling of horses from the ground, and general health care. Labs will parallel topics in lectures and provide students with practical applications of the techniques discussed.
Term(s) Offered: Fall
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
ANS 211 - Animal Nutrition
Credits - 4 Lecture - 3 Lab - 1
Designed to develop an understanding of applied animal nutrition. This course will cover proteins, carbohydrates, lipids, vitamins, minerals, and the use of these nutrients by livestock. Rations will be balanced during the laboratory sessions.
Recommended preparation: ANS 121
Corequisite: AGR 280
Term(s) Offered: Winter
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
ANS 216 - Pregnancy Testing/Bovine
Credits - 1 Lab - 1
This course is a “hands-in” course requiring students to pregnancy check a minimum of fifty cows to become proficient. This class has an open lab to accommodate students and give all adequate time to develop a high level of proficiency.
Recommended preparation: ANS 121 , ANS 122 , and instructor approval.
Term(s) Offered: Fall
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
ANS 217 - Artificial Insemination
Credits - 3 Lecture - 2 Lab - 1
Basic considerations of reproductive physiology and artificial insemination of livestock. Emphasis in the lab is placed on the application of lecture material and developing proficiency in the artificial insemination of cattle.
Recommended preparation: ANS 121 and ANS 122
Term(s) Offered: Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
ANS 220 - Beef Production
Credits - 4 Lecture - 3 Lab - 1
Designed to enable students to learn proven practices in modern beef production. Students will develop skills which can lead to a successful cattle operation.
Recommended preparations: ANS 121 and ANS 122
Term(s) Offered: Winter
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
ANS 231 - Livestock Evaluation
Credits - 3 Lecture - 2 Lab - 1
The subject of livestock judging and evaluation is presented in a practical and direct manner. Classroom study of current type and market demand is combined with actual livestock judging experience. Classes of cattle, sheep, swine, and horses will be judged.
Term(s) Offered: Fall
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
ANS 232 - Live Meat Animal Evaluation
Credits - 3 Lecture - 2 Lab - 1
More fully develops the principles emphasized in the first quarter. More time is spent in actual judging. Oral reasons for many of the classes are required. Students from this class participate on our intercollegiate livestock judging team.
Recommended preparation: ANS 231 or instructor approval.
Term(s) Offered: Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
ANS 240 - Animal Health
Credits - 5 Lecture - 4 Lecture/Lab - 1
Disease control as it relates to today’s modern livestock operation, including detailed study of health problems in beef cattle and study of horse, sheep and swine diseases. The lab develops student competency in practical and useful animal health skills.
Term(s) Offered: Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
ANS 261 - Introduction to Meat Science
Credits- 2 Lecture- 2
This course is designed to expose students to the various components that make up the study and career field of meat science. Topics will include HAACP (Hazard Analysis and Critical Control Points) plans, ODA (Oregon Department of Agriculture) vs. USDA (United States Department of Agriculture) regulations, muscle chemistry, product safety, and product quality. Students will participate in processing livestock from the live animal to a plate-ready product. Cooperative work experience is required for this course.
Term(s) Offered: Fall, Winter
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
ANS 262 - Introduction to Meat Processing
Credits - 2 Lecture- 2
This course is designed to expose students to the various components that will make up the study and career field of processed value-added meat products. Topics will include HACCP (Hazard Analysis and Critical Control Points) plans, ODA (Oregon Department of Agriculture) vs. USDA (United States Department of Agriculture) regulations, sausage and jerky, curing and smoking, ingredients, product safety, product quality, and labeling. Students will participate in the processing of livestock from the live animal to a plate-ready value-added product. Cooperative work experience is required for this course.
Term(s) Offered: Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
CSS 100 - Soils and Fertilizers
Credits - 3 Lecture - 2 Lab - 1
Students will study and evaluate the characteristics of the soil. Soil amendments and fertilizers are reviewed to determine crop requirements. Plant and soil analysis techniques are studied.
Term(s) Offered: Fall
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
CSS 109 - Introduction to Precision Agriculture
Credits - 2 Lecture - 2
This course will introduce students to a variety of concepts in precision agriculture, including the Global Positioning System (GPS), Global Information Systems (GIS), and various methods of data collection using precision agriculture technology. An emphasis will be placed on the development of an academic plan and successful completion of the precision irrigated agriculture degree, including introducing students to financial aid, the library, and the student service center.
Term(s) Offered: Fall
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
CSS 201 - Principles of Crop Science
Credits - 3 Lecture - 3
Covers the major farm practices used in Eastern Oregon. Major crops used to facilitate learning include wheat, barley, peas, potatoes, and corn. Other crops will be reviewed to determine their adaptability to local climate, soils, and markets.
Corequisite: AGR 280
Term(s) Offered: Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
CSS 210 - Forage Crops
Credits - 3 Lecture - 3
Students will study the various crops raised for livestock consumption. Proper planting, maintenance, harvest, and storage techniques, production and economic returns are topics reviewed in detail.
Corequisite: AGR 280
Term(s) Offered: Fall
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
CSS 211 - Introduction to Remote Sensing
Credits - 5 Lecture - 3 Lecture/Lab - 2
Students will obtain a working knowledge of the principles of aerial imagery and remote sensing, including satellites, photography, infrared, thermal sensing, and Lidar with emphasis on understanding and utilizing different types of remote sensors for primarily agricultural applications and objectives.
Term(s) Offered: Fall
|
| |
-
CSS 220 - Geospatial Data Collection
Credits - 5 Lecture - 3 Lecture/Lab - 2
This course will go into detail on types and methods of field data collection for spatial analysis and provide students with a solid background in data logging systems, project design, and an introduction to data analysis and map production for agricultural applications. Students will be responsible for identifying a study area, a question or management issue, and the data needed to answer the question as part of a term/team project. Students will learn not only the technical issues of field collection but also critical thinking skills and communication skills.
Prerequisiste: MTH 062 or higher and ET 114
Term(s) Offered: Fall
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
CSS 221 - Agricultural Spatial Analysis
Credits - 4 Lecture - 3 Lab - 1
This course is designed to provide students with a foundation in analyzing spatial data for agricultural applications. Students will process field data, compile reports, and create prescription and application maps. An emphasis will be placed on identifying and interpreting relationships and patterns in yield and other cropping factors.
Prerequisite:ET 114 and CSS 220
Term(s) Offered: Winter
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
CSS 240 - Pest Management
Credits - 4 Lecture - 4
Students will study the common pesticides used on today’s farms and ranches. Herbicides, insecticides, fungicides, and growth regulators will be reviewed. Methods of application and calibration are taught stressing safety in handling and disposal.
Corequisite: AGR 280
Term(s) Offered: Winter
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
HORT 100 - Plant Science
Credits - 3 Lecture - 3
Basic principles of plant science and the environmental factors associated with plant growth and development constitute the core of this course. Agricultural application of plants will be emphasized.
Corequisite: AGR 280
Term(s) Offered: Winter
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
HORT 111 - Alternative Crop Production
Credits - 3 Lecture - 3
Explores specialty crop production such as seed, berry, fruit, and melon production. Mulch use and drip irrigation will be emphasized. Greenhouse work may also be included.
Corequisite: AGR 280
Term(s) Offered: Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
RNG 241 - Range Management
Credits - 3 Lecture - 2 Lab - 1
Plants and domesticated farm animals: the integration of climate, soil, vegetation, and animal factors in the economic management of a range ecosystem.
Term(s) Offered: Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
VT 109 - Introduction to Veterinary Science
Credits - 2 Lecture - 2
Overview of the veterinary assistant’s job. This course covers the business of veterinary medicine with an emphasis on the practical aspects of front-office management. Topics will include: Veterinary medicine and the veterinary health care team, careers in veterinary medicine, types of veterinary practices, professionalism, and veterinary workplace, the Human-Animal Bond, Office Practices, Workplace Safety, Universal Precautions, Aseptic Technique, Basic Medical Terminology, Basic Clinical Skills, Basic Nutrition, and Basic Behavior. This will illustrate that the coursework is both practical and necessary.
Term(s) Offered: Fall
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
VT 110 - Fundamentals of Veterinary Assistant I
Credits - 3 Lecture - 2 Lab - 1
This course covers the business of Veterinary medicine with an emphasis on the practical aspects of front-office management. Topics will include: Veterinary medicine and the veterinary health care team, careers in veterinary medicine, types of veterinary practices, professionalism, and veterinary workplace, the Human-Animal Bond, Office Practices, Workplace Safety, Universal Precautions, Aseptic Technique, Basic Medical Terminology, Basic Clinical Skills, Basic Nutrition, and Basic Behavior.
Prerequisite: VT 109
Term(s) Offered: Winter
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
VT 111 - Fundamentals of Veterinary Assistant II
Credits - 3 Lecture - 2 Lab - 1
This course focuses on animal management and the production of food animals. Identification and treatment of diseases play a large role in this course. Students will also be introduced to One Health Sciences; occupations that involve animal health on a global level implementing research and surveillance of animal populations.
Prerequisite: VT 110
Term(s) Offered: Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
Apprenticeship
|
| |
-
APR 110A - Plumbing Apprenticeship Fundamentals
Credits - 4 Lecture - 4
This course will familiarize the apprentice with a brief history of plumbing laws governing the plumbing trade; materials and methods for installation and maintenance of potable water systems, waste and sewage disposal; the definitions, fundamentals rules, purpose and scope of the Uniform Plumbing Code (UPC).
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 110B - Plumbing Apprenticeship Math and Basic Installation
Credits - 4 Lecture - 4
This course covers the practical application of basic math to plumbing calculations and familiarizes the apprentice with basic installation practices utilizing the fundamental rules of the Uniform Plumbing Code and on-the-job Occupational Health and Safety requirements.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 110C - Plumbing Apprenticeship Print Reading
Credits - 4 Lecture - 4
This course covers installation practices for potable water, piping materials and methods for installation and maintenance of potable water systems, waste and sewage disposal, and the definitions, fundamental rules, purpose, and scope of the Uniform Plumbing Code (UPC).
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 110D - Plumbing Apprenticeship Basic Installation
Credits - 4 Lecture - 4
In this course, the apprentice will become familiar with the proper techniques for installing sanitary drainage systems, gas and electric tank-type water heaters and tankless water heaters, Uniform Plumbing Code and Occupational Safety and Health Association (OSHA) requirements.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 110E - Plumbing Apprenticeship Occupancy
Credits - 4 Lecture - 4
In this course, the plumbing apprentice will become familiar with advanced levels of blueprint reading and specialty drawings; installation of sewage and drainage systems, and further study of installation and safety practices.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 110F - Plumbing Apprenticeship Advanced Waste System
Credits - 4 Lecture - 4
This course will introduce the apprentice to several aspects of the plumbing trade, including the range of materials approved for venting purposes, the raising or lifting of waste materials to the elevation of the building drain by means of sump pumps, sewage pumps, and sewage ejectors; the use of traps to prevent dangerous gases from escaping into a building; and further study of installation and safety practices. Chapters 9 & 10 of the UPC.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 111A - LMPE Apprenticeship Fundamentals
Credits - 4 Lecture - 4
Related training for the LMPE Electrical Apprentice. The subject area will enable the apprentice to receive the technical knowledge of the skills required of an LMPE Electrician. Context will include trade history and concepts, trade math, basic electrical DC theory, and an introduction to the National Electrical Code.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 111B - LMPE Apprenticeship AC/DC Circuits
Credits - 4 Lecture - 4
Related training for LMPE Electrical Apprentice. The student will receive the technical knowledge of the skills required of an LMPE Electrician. Content will cover mathematical formulas of equations, basic AC theory, use of test equipment, and applicable National Electrical Code.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 111C - LMPE Apprenticeship Measurement
Credits - 4 Lecture - 4
This course is designed to familiarize the LMPE Electrical apprentice with advanced aspects of electrical theory, math and power distribution along with practical residential wiring and the National Electrical Code.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 111D - LMPE Apprenticeship Theory
Credits - 4 Lecture - 4
This course covers related training for the LMPE Electrical Apprentice. The student will receive the technical knowledge of the skills required of an LMPE Electrician. Course content includes the requirements for wiring and installation of electrical devices, transformers, over-current devices, wire devices, hazardous locations, residential calculation and application of the National Electrical Code.
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 111E - LMPE Apprenticeship Wiring and Print Reading
Credits - 4 Lecture - 4
This course covers related training for LMPE Apprentice. The apprentice will receive the technical knowledge of the skills required of an LMPE Electrician. The content will include requirements for wiring and installation of electrical devices, auxiliary gutters, raceways, fuses and over-current devices, wire devices, hazardous locations, busways, residential calculation, and applicable national electrical code.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 111F - LMPE Apprenticeship Installation
Credits - 4 Lecture - 4
This course covers the requirements for wiring and installation of electrical devices, auxiliary gutters, raceways, fuses and over-current devices, hazardous locations, busways, residential calculation, and applicable National Electrical Code for LMPE electrician apprentices.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 112A - Inside Electrical Apprenticeship Fundamentals
Credits - 4 Lecture - 4
Related training for Inside Wire Electrician Apprentice. The subject area will enable the apprentice to receive the technical knowledge of the skills required of an Inside Wire Electrician. Context will include trade history and concepts, trade math, basic electrical DC theory, and an introduction to the National Electrical Code.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 112B - Inside Electrician Apprenticeship AC/DC Circuits
Credits - 4 Lecture - 4
Related training for Inside Wire Electrician Apprentice. The student will receive the technical knowledge of the skills required of an Inside Wire Electrician. Content will cover mathematical formulas of equations, basic AC theory, use of test equipment, and applicable National Electrical Code.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 112C - Inside Electrical Apprenticeship Measurement
Credits - 4 Lecture - 4
This course is designed to familiarize the Inside Electrical apprentice with advanced aspects of electrical theory, math and power distribution along with practical residential wiring and the National Electrical Code.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 112D - Inside Electrical Apprenticeship Theory
Credits - 4 Lecture - 4
This course covers related training for the Inside Wire Electrical Apprentice. The student will receive the technical knowledge of the skills required of an Inside Wire Electrician. Course content includes the requirements for wiring and installation of electrical devices, transformers, over-current devices, wire devices, hazardous locations, residential calculation and application of the National Electrical Code.
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 114A - PLC Apprenticeship Hardware/Number Systems
Credits - 4 Lecture - 4
This course covers related training for the Programmable Logic Controller (PLC) apprentice to study theory and trade practices. Content includes an introduction to the trade, application, scope requirements, design, development, documentation, troubleshooting, programming, analog interface, and Input/Output concepts needed for understanding PLC’s in the workplace.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 114B - PLC Apprenticeship Programming Fundamentals
Credits - 4 Lecture - 4
This course covers related training for Programmable Logic Controller (PLC) apprentices to study theory and trade practices with content focused on input and output modules, creating a modular PLC, processors, introduction to ControlNet/DeviceNet, data organization, and basic relay instructions.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 114C - PLC Apprenticeship Timers, Counters, Controls
Credits - 4 Lecture - 4
This course covers related training for Programmable Logic Controller (PLC) apprentices to study theory and trade practices, the course includes relay instructions, programmable controller input modules, system documenting, timer and counter instructions.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 115A - LME Apprenticeship Fundamentals
Credits - 4 Lecture - 4
Related training for the LME Electrical Apprentice. The subject area will enable the apprentice to receive the technical knowledge of the skills required of an LME Electrician. Context will include trade history and concepts, trade math, basic electrical DC theory, and an introduction to the National Electrical Code.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 115B - LME Apprenticeship AC/DC Circuits
Credits - 4 Lecture - 4
Related training for LME Electrical Apprentice. The student will receive the technical knowledge of the skills required of an LME Electrician. Content will cover mathematical formulas of equations, basic AC theory, use of test equipment, and applicable National Electrical Code.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 115C - LME Apprenticeship Blueprint Reading
Credits - 4 Lecture - 4
This course covers related training for LME Apprentice. The apprentice will receive the technical knowledge of the skills required of an LME Electrician. The content will include requirements for wiring and installation of electrical devices, auxiliary gutters, raceways, fuses and over-current devices, wire devices, hazardous locations, busways, residential calculation, and applicable national electrical code.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117A - IMM Apprenticeship Reading Blueprints and Schematics
Credits - 3 Lecture - 3
This course covers all varieties of blueprints, schematics, and symbols used in commercial and industrial settings. Examines symbols on schematics, electrical symbols, diagrams, hydraulic, pneumatic, and piping. Discusses machine parts and machine drawings. Introduces sketching used in industrial plants including welding and joining symbols.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117B - IMM Apprenticeship Industrial Math/Measurement
Credits - 3 Lecture - 3
This course covers measurement and mathematical basics used in commercial and industrial applications. Examines all aspects of basic measurement concepts and procedures. Explains how to use scales and rules, combination calipers, and micrometers. Examines common fractions and decimals, powers, and roots. Moves on to cover geometry, algebra, and formulas for problem-solving. Concludes by explaining the properties of triangles.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117C - IMM Apprenticeship Metals in the Plant
Credits - 1 Lecture - 1
This course introduces metals, metallurgy, and metalworking used in industry. Discusses the properties of metals, including their mechanical properties. Examines industrial manufacturing processes. Covers iron and standard steels. Explains the different kinds of heat treatment and their usage. Discusses some techniques of working with copper, aluminum, magnesium, titanium, lead, nickel, tin, and zinc.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117D - IMM Apprenticeship Nonmetals in the Plant
Credits - 1 Lecture - 1
This course introduces major nonmetal materials and how they are most frequently used. Describes, the properties, characteristics, and classifications of each material. Covers synthetic and natural materials. Examines various paints and coatings, their proper use, preparation, and application. Surveys industrial chemicals. Chemical safety precautions are covered, along with the proper use of protective equipment.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117E - IMM Apprenticeship Hand Tools
Credits - 1 Lecture - 1
This course covers the most important hand tools used in the industrial workplace. The course includes the proper use of measuring tools, including a discussion of units of measurement. Examines the various kinds of wrenches and screwdrivers, their uses and handling techniques. Explains various hand tools by specialty: pipefitting tools, plumbing tools, electrician’s tools, sheet metalworking tools, machinists’ metal-working tools, hoisting and pulling tools.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117F - IMM Apprenticeship Portable Power Tools
Credits - 1 Lecture - 1
This course explains the uses, selection, safety, and care of industrial power tools: electric drills, electric hammers, pneumatic drills and hammers, screwdrivers, nut runners, wrenches, linear-motion and circular saws, routers and planes, electric sanders, grinders, and shears. Covers tool sharpening techniques for selected tools.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117G - IMM Apprenticeship Industrial Safety and Health
Credits - 1 Lecture - 1
This course covers government involvement in ensuring a safe workplace. Discusses safety in various situations, personal protective equipment, and fire safety. Includes expanded coverage of many health hazards. Covers environmental responsibility and the importance of maintaining a safe work environment.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117H - IMM Apprenticeship Troubleshooting Skills
Credits - 1 Lecture - 1
This course explores the subject of troubleshooting and the importance of proper maintenance procedures. Covers working with others, aids in communication, and trade responsibilities. Outlines troubleshooting techniques and aids, using schematics and symbols. Focuses on specific maintenance tasks, breakdown maintenance, and planned maintenance.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117I - IMM App. Industrial Rigging Principles and Practices
Credits - 1 Lecture - 1
This course covers techniques and safeguards in the use of rope, chain, hoists, and scaffolding when moving heavy plant equipment and maintaining plant utilities.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117J - IMM Apprenticeship Equipment Installation
Credits - 1 Lecture - 1
This course covers installation procedures for large plant equipment. Considers factors affecting proper installation in detail, from preparatory relocation of underground piping and wiring through equipment anchoring, aligning, and running tests.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117K - IMM Apprenticeship Basic Mechanics
Credits - 1 Lecture - 1
This course covers force and motion, work and energy, and fluid mechanics as applied in industrial maintenance. Explains principles of operation for simple machines, such as lever, inclined plane, wheel and axle, pulley, and screw. Explains the basic elements of industrial machines, as well as common measurement tools used to monitor and adjust equipment. Covers hand tools, power tools, and fasteners, ending with a discussion of ways to reduce friction and wear.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117L - IMM Apprenticeship Lubricants and Lubrication
Credits - 1 Lecture - 1
This course covers force and motion, work and energy, and fluid mechanics as applied in industrial maintenance. Explains principles of operation for simple machines, such as lever, inclined plane, wheel and axle, pulley, and screw. Explains the basic elements of industrial machines, as well as common measurement tools used to monitor and adjust equipment. Covers hand tools, power tools, and fasteners, ending with a discussion of ways to reduce friction and wear.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117M - IMM Apprenticeship Power Transmission Equipment
Credits - 1 Lecture - 1
This course covers belt drives, chain drives, gears and gear drives, adjustable-speed drives, shaft alignment, shaft coupling devices, and clutches and brakes.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117N - IMM Apprenticeship Bearings
Credits - 1 Lecture - 1
This course covers principles and applications of various types of bearings, including plain journal, ball, and roller bearings. Explains installation, inspection, and repair of bearings. Deals with specialized bearings, including powdered-metal, nonmetallic, and hydrostatic bearings. Covers bearing seals, lubrication, and maintenance practices.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117O - IMM Apprenticeship Pumps
Credits - 1 Lecture - 1
Covers typical applications of various types of pumps. Describes factors affecting pump selection. Explains operating principles of centrifugal, propeller, turbine, rotary, reciprocating, and metering pumps. Includes special-purpose pumps, diaphragm pumps, and others designed to handle corrosive and abrasive substances. Covers pump maintenance, packing gland, seal, and bearing replacement.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117P - IMM Apprenticeship Piping Systems
Credits - 1 Lecture - 1
Covers piping and tubing systems used for fluid transport in the plant: hydraulic fluids, steam, liquefied product, refrigerant, and water. Shows typical metallic and nonmetallic piping systems, pipe-joining methods, and how tubing and hoses differ from piping. Covers valves, pipe fittings, hangers, supports, and insulation, and shows how tubing is sized, fitted, bent, and joined. Explains uses of traps, filters, and strainers.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117Q - IMM Apprenticeship Basic Hydraulics
Credits - 1 Lecture - 1
This course covers hydraulic principles, types of hydraulic fluids and their characteristics. Describes components of hydraulic systems and their functions; including filters and strainers, reservoirs and accumulators, pumps, piping, tubing and hoses, control valves, and devices. The course also covers a variety of cylinders and hydraulic motors.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117R - IMM Apprenticeship Hydraulic Troubleshooting
Credits - 1 Lecture - 1
This course covers understanding hydraulic systems, using schematic diagrams, installation procedures, cleanliness, and safety. Includes tubing cutting, bending, and flaring, identification and selection of proper fluid, and charging the system. Discusses planned maintenance, specific repair/replacement recommendations, system diagnosis, and troubleshooting.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117S - IMM Apprenticeship Basic Pneumatics
Credits - 1 Lecture - 1
This course covers how work, force, and energy are applied to principles of pneumatics. Explains the operating principles of reciprocating, positive displacement, rotary, and dynamic air compressors. Covers primary and secondary air treatment including; valves, logic, devices, cylinders, and air motors.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117T - IMM Apprenticeship Pneumatic Troubleshooting
Credits - 1 Lecture - 1
This course covers pneumatic systems, schematic symbols and diagrams, installing system components, planned maintenance, system diagnosis, and troubleshooting. The course also includes maintenance of air compressors, control valves, air motors, electrical components, and hybrid systems.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117U - IMM Apprenticeship Chemical Hazards
Credits - 1 Lecture - 1
This course covers OSHA’S Hazard Communication Standard and discusses the physical and health hazards presented by dangerous chemicals. The student will also be introduced to the information contained in a Material Safety Data Sheet (MSDS).
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 117V - IMM Apprenticeship Bulk Handling Conveyors
Credits - 1 Lecture - 1
This course covers OSHA’S Hazard Communication Standard and discusses the physical and health hazards presented by dangerous chemicals. The student will also be introduced to the information contained in a Material Safety Data Sheet (MSDS).
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 210G - Plumbing Apprenticeship Residential Installation
Credits - 4 Lecture - 4
This course will introduce the plumbing apprentice to the broad variety of fixtures (tubs, showers, toilets, water heaters, etc.) and fixture fittings (faucets, valves, trim, regulators, gauges) found in residential, commercial, and industrial buildings and instruct the apprentice in the Code requirements and industry practices for proper use and installation.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 210H - Plumbing Apprenticeship Commercial Installation
Credits - 4 Lecture - 4
This course will allow the apprentice to master more complex mathematical calculations encountered in the trade; understand the principles of heat transfer and heat retention in connection with water heaters; and understand methods of water treatment as it applies to the Plumbing trade.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 210I - Plumbing Apprenticeship Code
Credits - 4 Lecture - 4
In this course, the Plumbing apprentice will master the concepts and procedures of reading a complete set of plans; basic electricity; installation of storm drains; and the Uniform Plumbing Code as it relates to the Plumbing industry.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 210J - Plumbing Apprenticeship Industrial Installation
Credits - 4 Lecture - 4
In this course the Plumbing apprentice will gain proficiency in; the service and maintenance of residential, commercial, and industrial plumbing primarily focusing on industrial plumbing installation and repair; and associated Uniform Plumbing Codes for industrial installations.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 210K - Plumbing Apprenticeship Basic Waste Water System
Credits - 4 Lecture - 4
This course will enable the Plumbing apprentice to gain proficiency in isometric drawings to depict sizing in water, drainage, and gas piping systems; direct, indirect, and special waste systems; protection of water supply - sources of possible contamination, prevention devices, and practices; principles of hydraulics and pneumatic related to plumbing; pump theory - installation and maintenance; developing shop drawings and figuring materials for a job.
Term(s) Offered: Fall, Winter, Spring
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 210L - Plumbing Apprenticeship Code and Test Preparation
Credits - 4 Lecture - 4
This course covers the review of the Uniform Plumbing Code designed to assist the apprentice with various aspects of taking and passing the Oregon Plumbing License exam.
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 211G - LMPE Apprenticeship Safety and Code
Credits - 4 Lecture - 4
This course covers the technical knowledge of the skills required of an LMPE Electrician. Content will cover applied electrical theory, residential and commercial wiring practices, busways, motor fundamental application National Electrical Code.
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 211H - LMPE Apprenticeship Motors and Controls
Credits - 4 Lecture - 4
This course will allow the LMPE Electrical apprentice to understand the technical knowledge of the skills required including motors, generators, controls, and applicable National Electrical Code.
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 211I - LMPE Apprenticeship Fiber Optics
Credits - 4 Lecture - 4
This course covers applied electrical theory, fiber optics, specialty applications, residential and commercial wiring practices, busways, motor fundamentals, and applicable National Electrical Code for electrical installations.
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
-
APR 211J - LMPE Apprenticeship Math/Test Equipment
Credits - 4 Lecture - 4
This course covers related training for LMPE Electrician apprentice. Content includes trade history, safety and first aid, blueprint reading, commercial and residential calculations, wiring methods, related theory and National Electrical Code.
Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
|
| |
Page: 1
| 2
| 3
| 4
| 5
|
|
|
