Mar 28, 2024  
2021-2022 Academic Catalog 
    
2021-2022 Academic Catalog [ARCHIVED CATALOG]

Course Numbers, Credits, Descriptions


Course Numbers

Generally, courses with letter prefixes apply toward degrees and certificates, and courses with 100 and 200 numbers are college transfer courses; those numbered 200 to 299 are considered sophomore-level courses. Be sure to check the degree requirements for the certificate or degree you are seeking to ensure that the course you are taking will be counted.

Course Credits

In order to earn an associate’s degree in two years, students should enroll for an average of 16 college-level credits in fall, winter, and spring terms. If college preparatory courses are required, the number of credits each term would increase accordingly. Curriculum and program requirements described in this catalog provide more information on the program or degree of your choice.

Students participating in intercollegiate athletics, must complete and pass at least 12 credit hours each term for eligibility purposes. Students are encouraged to visit with BMCC’s athletic director and/or our coaches for detailed eligibility requirements.

Reading Course Descriptions

Courses offered at BMCC are listed in this section of the catalog. Not every course is offered every term. Use the schedule of classes to determine quarterly course offerings. Students who plan to transfer should consult with their program advisor to ensure course transferability.

HOW TO READ A COURSE DESCRIPTION

Courses are grouped by area of study and listed alphabetically by letter prefix and course number. Courses numbered 100 and above are designed for transfer to other colleges for degree credit.

Course Number and Title Letters and numbers along with the title of the course. Example: AGM131 Agricultural Saftey
Course Description Briefly summarizes course content
Credits, Lecture, Lab The number of credits earned by taking the course is noted. Each lecture credit corresponds to one hour of instruction per week. Each lab credit equals 3 hours per week. Each other credit generally refers to 2 hours of class time per credit.
Prerequisite  Prerequisites are listed below course descriptions. A prerequisite is a course that must be completed before enrolling in the selected course. It is important to note prerequisites before registering.
Corequisite Corequisite is a course that should be completed either before or while attending the selected course.

Course Designations:

Non-Designated Courses

Courses numbered 100 and above listed in this section of the catalog that have not received a designation mark as outlined above may or may not meet degree requirements or be transferable to other institutions. Questions regarding transferability of courses should be directed to the Academic Advisor, Director of Enrollment Management, or Executive Vice President of Instruction and Student Success.

Non-Transfer Courses

Courses with numerical designations less than 100 are not transferable to four-year institutions.

Progression Charts

Math Progression Chart - Click here

Writing Progression Chart - Click here

 

Apprenticeship

  
  • APR 115C - LME Apprenticeship Blueprint Reading


    Credits - 4 Lecture - 4
    This course covers related training for LME Apprentice. The apprentice will receive the technical knowledge of the skills required of an LME Electrician. The content will include requirements for wiring and installation of electrical devices, auxiliary gutters, raceways, fuses and over-current devices, wire devices, hazardous locations, busways, residential calculation and applicable national electrical code.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117A - IMM Apprenticeship Reading Blueprints and Schematics


    Credits - 3 Lecture - 3
    This course covers all varieties of blueprints, schematics, and symbols used in commercial and industrial settings. Examines symbols on schematics, electrical symbols, diagrams, hydraulic, pneumatic, and piping. Discusses machine parts and machine drawings. Introduces sketching used in industrial plants including welding and joining symbols.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117B - IMM Apprenticeship Industrial Math/Measurement


    Credits - 3 Lecture - 3
    This course covers measurement and mathematical basics used in commercial and industrial applications. Examines all aspects of basic measurement concepts and procedures. Explains how to use scales and rules, combination calipers, and micrometers. Examines common fractions and decimals, powers and roots. Moves on to cover geometry, algebra, and formulas for problem solving. Concludes by explaining properties of triangles.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117C - IMM Apprenticeship Metals in the Plant


    Credits - 1 Lecture - 1
    This course introduces metals, metallurgy, and metalworking used in industry. Discusses the properties of metals, including their mechanical properties. Examines industrial manufacturing processes. Covers iron and standard steels. Explains the different kinds of heat treatment and their usage. Discusses some techniques of working with copper, aluminum, magnesium, titanium, lead, nickel, tin, and zinc.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117D - IMM Apprenticeship Nonmetals in the Plant


    Credits - 1 Lecture - 1
    This course introduces major nonmetal materials and how they are most frequently used. Describes, properties, characteristics, and classifications of each material. Covers synthetic and natural materials. Examines various paints and coatings, their proper use, preparation, and application. Surveys industrial chemicals. Chemical safety precautions are covered, along with the proper use of protective equipment.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117E - IMM Apprenticeship Hand Tools


    Credits - 1 Lecture - 1
    This course covers the most important hand tools used in the industrial workplace. The course includes the proper use of measuring tools, including a discussion of units of measurement. Examines the various kinds of wrenches and screwdrivers, their uses and handling techniques. Explains various hand tools by specialty: pipefitting tools, plumbing tools, electrician’s tools, sheet metalworking tools, machinists’ metal-working tools, hoisting and pulling tools.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117F - IMM Apprenticeship Portable Power Tools


    Credits - 1 Lecture - 1
    This course explains the uses, selection, safety, and care of industrial power tools: electric drills, electric hammers, pneumatic drills and hammers, screwdrivers, nutrunners, wrenches, linear-motion and circular saws, routers and planes, electric sanders, grinders, and shears. Covers tool sharpening techniques for selected tools.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117G - IMM Apprenticeship Industrial Safety and Health


    Credits - 1 Lecture - 1
    This course covers government involvement in ensuring a safe workplace. Discusses safety in various situations, personal protective equipment and fire safety. Includes expanded coverage of many health hazards. Covers environmental responsibility and the importance of maintaining a safe work environment.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117H - IMM Apprenticeship Troubleshooting Skills


    Credits - 1 Lecture - 1
    This course explores the subject of troubleshooting and the importance of proper maintenance procedures. Covers working with others, aids in communication, and trade responsibilities. Outlines troubleshooting techniques and aids, using schematics and symbols. Focuses on specific maintenance tasks, breakdown maintenance, and planned maintenance.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117I - IMM App. Industrial Rigging Principles and Practices


    Credits - 1 Lecture - 1
    This course covers techniques and safeguards in the use of rope, chain, hoists, and scaffolding when moving heavy plant equipment and maintaining plan utilities.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117J - IMM Apprenticeship Equipment Installation


    Credits - 1 Lecture - 1
    This course covers installation procedures for large plant equipment. Considers factors affecting proper installation in detail, from preparatory relocation of underground piping and wiring through equipment anchoring, aligning and running tests.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117K - IMM Apprenticeship Basic Mechanics


    Credits - 1 Lecture - 1
    This course covers force and motion, work and energy, and fluid mechanics as applied in industrial maintenance. Explains principles of operation for simple machines, such as lever, inclined plane, wheel and axle, pulley, and screw. Explains the basic elements of industrial machines, as well as common measurement tools used to monitor and adjust equipment. Covers hand tools, power tools and fasteners, ending with a discussion of ways to reduce friction and wear.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117L - IMM Apprenticeship Lubricants and Lubrication


    Credits - 1 Lecture - 1
    This course covers force and motion, work and energy, and fluid mechanics as applied in industrial maintenance. Explains principles of operation for simple machines, such as lever, inclined plane, wheel and axle, pulley, and screw. Explains the basic elements of industrial machines, as well as common measurement tools used to monitor and adjust equipment. Covers hand tools, power tools and fasteners, ending with a discussion of ways to reduce friction and wear.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117M - IMM Apprenticeship Power Transmission Equipment


    Credits - 1 Lecture - 1
    This course covers belt drives, chain drive, gears and gear drives, adjustable-speed drives, shaft alignment, shaft coupling devices, and clutches and brakes.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117N - IMM Apprenticeship Bearings


    Credits - 1 Lecture - 1
    This course covers principles and applications of various types of bearings, including plain journal, ball, and roller bearings. Explains installation, inspection and repair of bearings. Deals with specialized bearings, including powdered-metal, nonmetallic, and hydrostatic bearings. Covers bearing seals, lubrication, and maintenance practices.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117O - IMM Apprenticeship Pumps


    Credits - 1 Lecture - 1
    Covers typical applications of various types of pumps. Describes factors affecting pump selection. Explains operating principles of centrifugal, propeller, and turbine, rotary, reciprocating, and metering pumps. Includes special-purpose pumps, diaphragm pumps, and others designed to handle corrosive and abrasive substances. Covers pump maintenance, packing gland, seal, and bearing replacement.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117P - IMM Apprenticeship Piping Systems


    Credits - 1 Lecture - 1
    Covers piping and tubing systems used for fluid transport in the plant: hydraulic fluids, steam, liquefied product, refrigerant, and water. Shows typical metallic and nonmetallic piping systems, pipe-joining methods, and how tubing and hoses differ from piping. Covers valves, pipe fittings, hangers, supports, and insulation, and shows how tubing is sized, fitted, bent, and joined. Explains uses of traps, filters, and strainers.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117Q - IMM Apprenticeship Basic Hydraulics


    Credits - 1 Lecture - 1
    This course covers hydraulic principles, types of hydraulic fluids and their characteristics. Describes components of hydraulic systems and their functions; including filters and strainers, reservoirs and accumulators, pumps, piping, tubing and hoses, control valves, and devices. The course also covers a variety of cylinders and hydraulic motors.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117R - IMM Apprenticeship Hydraulic Troubleshooting


    Credits - 1 Lecture - 1
    This course covers understanding hydraulic systems, using schematic diagrams, installation procedures, cleanliness and safety. Includes tubing cutting, bending, and flaring, identification and selection of proper fluid, and charging the system. Discusses planned maintenance, specific repair/replacement recommendations, system diagnosis, and troubleshooting.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117S - IMM Apprenticeship Basic Pneumatics


    Credits - 1 Lecture - 1
    This course covers how work, force, and energy are applied to principles of pneumatics. Explains the operating principles of reciprocating, positive displacement, rotary, and dynamic air compressors. Covers primary and secondary air treatment including; valves, logic, devices, cylinders, and air motors.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117T - IMM Apprenticeship Pneumatic Troubleshooting


    Credits - 1 Lecture - 1
    This course covers pneumatic systems, schematic symbols and diagrams, installing system components, planned maintenance, system diagnosis, and troubleshooting. The course also includes maintenance of air compressors, control valves, air motors, electrical components, and hybrid systems.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117U - IMM Apprenticeship Chemical Hazards


    Credits - 1 Lecture - 1
    This course covers OSHA’S Hazard Communication Standard and discusses the physical and health hazards presented by dangerous chemicals. The student will also be introduced to the information contained in a Material Safety Data Sheet (MSDS).
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 117V - IMM Apprenticeship Bulk Handling Conveyors


    Credits - 1 Lecture - 1
    This course covers OSHA’S Hazard Communication Standard and discusses the physical and health hazards presented by dangerous chemicals. The student will also be introduced to the information contained in a Material Safety Data Sheet (MSDS).
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 210G - Plumbing Apprenticeship Residential Installation


    Credits - 4 Lecture - 4
    This course will introduce the plumbing apprentice to the broad variety of fixtures (tubs, showers, toilets, water heaters etc.) and fixture fittings (faucets, valves, trim, regulators, gauges) found in residential, commercial and industrial building and instruct the apprentice in the Code requirements and industry practices for proper use and installation.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 210H - Plumbing Apprenticeship Commercial Installation


    Credits - 4 Lecture - 4
    This course will allow the apprentice to master more complex mathematical calculations encountered in the trade; understand the principles of heat transfer and heat retention in connection with water heaters; and understand methods of water treatment as it applies to the Plumbing trade.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 210I - Plumbing Apprenticeship Code


    Credits - 4 Lecture - 4
    In this course, the Plumbing apprentice will master the concepts and procedures of reading a complete set of plans; basic electricity; installation of storm drains; and the Uniform Plumbing Code as it relates to the Plumbing industry.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 210J - Plumbing Apprenticeship Industrial Installation


    Credits - 4 Lecture - 4
    In this course the Plumbing apprentice will gain proficiency in; service and maintenance of residential, commercial and industrial plumbing primarily focusing on industrial plumbing installation and repair; and associated Uniform Plumbing Codes for industrial installations.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 210K - Plumbing Apprenticeship Basic Waste Water System


    Credits - 4 Lecture - 4
    This course will enable the Plumbing apprentice to gain proficiency in isometric drawings to depict sizing in water, drainage and gas piping systems; direct, indirect and special waste system; protection of water supply - sources of possible contamination, prevention devices and practices; principles of hydraulics and pneumatic related to plumbing; pump theory - installation and maintenance; developing shop drawings and figuring materials for a job.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 210L - Plumbing Apprenticeship Code and Test Preparation


    Credits - 4 Lecture - 4
    This course covers the review of the Uniform Plumbing Code designed to assist the apprentice with various aspects of taking and passing the Oregon Plumbing License exam.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 211G - LMPE Apprenticeship Safety and Code


    Credits - 4 Lecture - 4
    This course covers the technical knowledge of the skills required of an LMPE Electrician. Content will cover applied electrical theory, residential and commercial wiring practices, busways, motor fundamental application National Electrical Code.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 211H - LMPE Apprenticeship Motors and Controls


    Credits - 4 Lecture - 4
    This course will allow the LMPE Electrical apprentice to understand the technical knowledge of the skills required including motors, generators, controls, and applicable National Electrical Code.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 211I - LMPE Apprenticeship Fiber Optics


    Credits - 4 Lecture - 4
    This course covers applied electrical theory, fiber optics, specialty applications, residential and commercial wiring practices, busways, motor fundamentals, and applicable National Electrical Code for electrical installations.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 211J - LMPE Apprenticeship Math/Test Equipment


    Credits - 4 Lecture - 4
    This course covers related training for LMPE Electrician apprentice. Content includes trade history, safety and first aid, blueprint reading, commercial and residential calculations, wiring methods, related theory and National Electrical Code.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 211K - LMPE Apprenticeship Voltage


    Credits - 4 Lecture - 4
    This course covers a thorough review of the National Electrical Code book. Theory and application of motor controls, solid state fundamentals, special termination, layout, hazardous locations and transformer locations.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 211L - LMPE Apprenticeship Code and Test Prep


    Credits - 4 Lecture - 4
    This course covers the review of the National Electrical Code designed to assist the apprentice with various aspects of taking and passing the Oregon State Limited Manufacture Plant Electrical License exam.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 212G - Inside Electrical Apprenticeship Safety and Code


    Credits - 4 Lecture - 4
    This course covers the technical knowledge of the skills required of an Inside Wire Electrician. Content will cover applied electrical theory, residential and commercial wiring practices, busways, motor fundamental application National Electrical Code.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 212H - Inside Electrical Apprenticeship Motors and Controls


    Credits - 4 Lecture - 4
    This course will allow the apprentice to understand the technical knowledge of the skills required including motors, generators, controls, and applicable National Electrical Code.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 212I - Inside Electrical Apprenticeship Fiber Optics


    Credits - 4 Lecture - 4
    This course covers applied electrical theory, fiber optics, specialty applications, residential and commercial wiring practices, busways, motor fundamentals, and applicable National Electrical Code for electrical installations.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 212J - Inside Electrical Apprenticeship Math/Test Equipment


    Credits - 4 Lecture - 4
    This course covers related training for Inside Wire Electrician apprentice. Content includes trade history, safety and first aid, blueprint reading, commercial and residential calculations, wiring methods, related theory and National Electrical Code.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 212K - Inside Electrical Apprenticeship Voltage


    Credits - 4 Lecture - 4
    This course covers a thorough review of the National Electrical Code book. Theory and application of motor controls, solid state fundamentals, special termination, layout, hazardous locations and transformer locations.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 212L - Inside Electrical Apprenticeship Code and Test Prep


    Credits - 4 Lecture - 4
    This course covers the review of the National Electrical Code designed to assist the apprentice with various aspects of taking and passing the Oregon State Electrical License exam.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 214D - PLC Apprenticeship Operation


    Credits - 4 Lecture - 4
    This course covers related training for Programmable Logic Controller (PLC) apprentices to study theory and trade practices content focused on automatic control systems, accuracy, errors, pressure measurement and measurement principles.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 214E - PLC Apprenticeship Troubleshooting


    Credits - 4 Lecture - 4
    This course covers related training for Programmable Logic Controller (PLC) apprentice to study theory and trade practices with content focused on compensation, temperature measurement, pneumatic principles and control valves, automatic control and troubleshooting the system.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 214F - PLC Apprenticeship Practical Applications


    Credits - 4 Lecture - 4
    This course covers related training for Programmable Logic Controller (PLC) apprentices to study theory and trade practices with content focused on calibration, errors, control valves, and special programmable controller functions.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 215D - LME Apprenticeship Safety and Code


    Credits - 4 Lecture - 4
    This course covers the technical knowledge of the skills required of an LME Electrician. Content will cover applied electrical Theory, residential and commercial wiring practices, busways, motor fundamental application National Electrical Code.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 215E - LMPE Apprenticeship Motors and Controls


    Credits - 4 Lecture - 4
    This course will allow the LME Electrical apprentice to understand the technical knowledge of the skills required including motors, generators, controls, and applicable National Electrical Code.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 215F - LME Apprenticeship Code and Test Prep


    Credits - 4 Lecture - 4
    This course covers the review of the National Electrical Code designed to assist the LME Electrical apprentice with various aspects of taking and passing the Oregon State Limited Maintenance Electrical License exam.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217A - IMM Apprenticeship Maintenance of Mechanical Drives


    Credits - 1 Lecture - 1
    This course covers mechanical drive alignment, coupling alignment and includes installation and maintenance of mechanical drives, from chain drives to enclosed gear drives.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217B - IMM Apprenticeship Mechanical and Fluid Drive Systems


    Credits - 1 Lecture - 1
    This course covers further details of drive maintenance, including brakes, clutches, and adjustable-speed drives. APR217B also covers maintenance and troubleshooting of fluid drives and package drive systems.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217C - IMM Apprenticeship Bearing & Shaft Seal Maintenance


    Credits - 1 Lecture - 1
    This course covers industrial drive maintenance, including brakes, clutches, and adjustable-speed drives. APR217C also covers maintenance and troubleshooting of fluid drives and package drive systems for industrial equipment and machinery.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217D - IMM Apprenticeship Pump Installation and Maintenance


    Credits - 1 Lecture - 1
    This course introduces the Industrial Maintenance Mechanic apprentice to basic industrial machinery pumping concepts and the required maintenance of packing and seals. APR217D also covers the maintenance and overhaul of centrifugal and rotary pumps.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217E - IMM Apprenticeship Maintenance Pipe Fitting


    Credits - 1 Lecture - 1
    This course covers components and terminology used in industrial piping systems including measurement and maintenance of threaded, welded and plastic piping systems. APR217E also explains the use of pipefitting accessories, supports, traps, expansion joints, filters and strainers.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217F - IMM Apprenticeship Tubing & Hose System Maintenance


    Credits - 1 Lecture - 1
    This course covers industrial tubing installation and specifications. APR217F explores the procedures used for handling, bending, cutting and installing tubing in an industrial setting.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217G - IMM Appr Valve Maintenance & Piping System Protection


    Credits - 1 Lecture - 1
    This course covers components and terminology used in industrial piping systems including measurement and maintenance of threaded, welded and plastic piping systems. APR 217E  also explains the use of pipefitting accessories, supports, traps, expansion joints, filters and strainers.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217H - IMM Apprenticeship Force and Motion


    Credits - 1 Lecture - 1
    This course covers fundamentals of force and motion. APR217H demonstrates how mathematical and graphical representations can help clarify our thinking about mechanical force and motion.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217I - IMM Apprenticeship Introduction to Robotics


    Credits - 1 Lecture - 1
    This course covers the background for a detailed study of robot maintenance. APR217I introduces the apprentice to the basics of robotics, using clear, easy-to-follow language to take the mystery out of robot technology.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217J - IMM Apprenticeship Welding Principles


    Credits - 1 Lecture - 1
    This course covers fundamentals of welding, discusses welding safety considerations and precautions. APR217J also covers oxyfuel and arc welding equipment, welding techniques and symbols.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217K - IMM Apprenticeship Oxyfuel Operations


    Credits - 1 Lecture - 1
    This course covers the welding of ferrous and nonferrous metals. APR217K also introduces the student to oxygen cutting, brazing, soldering, and surfacing techniques.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217L - IMM Apprenticeship Arc Welding Operations


    Credits - 1 Lecture - 1
    This course covers shielded metal arc welding, selecting electrodes for SMAW, gas metal and tungsten arc welding. APR217L also includes preheating and reheating of metals, welding nonferrous metals, pipe welding, hard facing and rebuild welding.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217M - IMM Apprenticeship Basic Electricity and Electronics


    Credits - 1 Lecture - 1
    This course covers a basic nonmathematical approach to understanding principles of electricity. APR217M introduces electron theory, static electricity, electrons in motion, and magnetism, including basic methods of measuring current, voltage, and resistance. The course will introduce the student to circuit components-conductors, insulators, resistors, capacitors and simple Ohm’s Law calculations for DC and AC circuits.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217N - IMM Apprenticeship Electrical Safety and Protection


    Credits - 1 Lecture - 1
    This course examines electrical hazards and stresses the importance of electrical safety when working in an industrial facility. APR217N covers the equipment and procedures necessary to work safely with electricity, including personal protective equipment, lockout/tagout procedures, grounding, fuses, circuit breakers, and motor protection devices and their use.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217O - IMM Apprenticeship How Power Plants Work


    Credits - 1 Lecture - 1
    This course covers the basic steam generation system, how thermal energy is converted into electrical energy, components of the system, and design features for gaining thermal efficiency. APR217O includes handling of water, fuel, and wastes, and the operating features of a power plant.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217P - IMM Apprenticeship Introduction to Packaging


    Credits - 1 Lecture - 1
    This course covers the job of packaging mechanic. It provides detail of the major types of packaging machinery including various mechanical drives, couplings, motors, brakes, variable speed drives, clutches, electrical controls, motor starters, event sequencing controls, and packaging.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217Q - IMM Apprenticeship Packaging Machinery


    Credits - 1 Lecture - 1
    This course covers operating and servicing various types of packaging machinery. APR217Q studies different types of liquid filling machines, positive displacement fillers, filling, sealing machines, as well as volumetric filling machines and blister packaging machines.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217R - IMM Apprenticeship Casing Machinery


    Credits - 1 Lecture - 1
    This course covers the operating characteristics and service techniques of accessory or auxiliary machines used with packaging lines. APR217R examines general operating characteristics of labeling equipment, uncasing, unscrambling, and cleaning machines. The course concludes by introducing the student to gluing equipment and adhesives, wrapping machines, tying, strapping, stitching machines, and shrink wrap devices.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217S - IMM Apprenticeship Programmable Logic Controllers


    Credits - 1 Lecture - 1
    This course covers the basic operating principles of all Programmable Logic Controllers PLCs including; inputs and outputs, programming, maintenance, and networking.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.
  
  • APR 217T - IMM Apprenticeship Machine Shop Practices


    Credits - 3 Lecture - 3
    This course covers the principles of machining, measurement, tool grinding, and machine shop safety. In addition, APR217T covers the major types of lathes and their attachments, safety, maintenance, job preparation and basic lathe operations.
    Course Designation: C/T Elective - A maximum of 12 credits of college-level career and technical courses may be used as electives in the A.A.O.T. and the A.A.S. degrees.

Art

  
  • ART 101 - Introduction to Visual Arts


    Credits - 4 Lecture - 4
    Addresses seeing, experiencing, and appreciating the world through architecture, gardens, fountains, and public spaces. Examines how communities express the values, technology, geography, and economic structure of many different cultures in the light of aesthetic, historic, and critical factors.
    Prerequisite: WR 060  or Placement, WR 115  strongly recommended.
    Term(s) Offered: Fall
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 102 - Introduction to Visual Arts


    Credits - 4 Lecture - 4
    Addresses painting and sculpture in terms of experiencing, appreciating, and understanding their role in our lives. Art is examined in the light of aesthetic, historic, and critical issues.
    Prerequisite: WR 060  or Placement, WR 115  strongly recommended.
    Term(s) Offered: Winter
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 103 - Introduction to Visual Arts


    Credits - 4 Lecture - 4
    Addresses issues relating to design in our daily lives including commercial, industrial, crafts, and product design. Examines how design expresses the values, technology, economy, and taste of our culture in light of aesthetic, historic, and critical factors.
    Prerequisite: WR 060  or Placement, WR 115  strongly recommended.
    Term(s) Offered: Spring
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 115 - Basic Design


    Credits - 4 Lecture - 3 Other - 1
    Introduces two dimensional black and white foundations studio experience centered on creative problem solving. Develops perceptual awareness and understanding. Establishes critical skills and personal artistic vision. Investigates a broad range of materials, techniques and projects to explore black and white design concepts with reference to historical and contemporary perspectives. Basic Design series 115, 116, and 117 may be taken in any sequence.
    Term(s) Offered: Fall
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 116 - Basic Design


    Credits - 4 Lecture - 3 Other - 1
    Introduces color foundations studio experience centered on creative problem solving. Develops perceptual awareness and understanding. Establishes critical skills and personal artistic vision. Investigates a broad range of materials, techniques and projects to explore color design concepts with reference to historical and contemporary perspectives. Basic Design series 115, 116, and 117 may be taken in any sequence.
    Term(s) Offered: Winter
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 117 - Basic Design


    Credits - 4 Lecture - 3 Other - 1
    Explores ways of seeing and creating work that acknowledges personal artistic intentions. Examines various 2-D, 3-D, and 4-D media and processes used to develop and encourage creative problem solving. Establishes critical skills necessary to evaluate art through critiques, discussions, and artistic presentation. Investigates artistic intent, aesthetic and structural solutions, and perceptual awareness. Basic Design series 115, 116, and 117 may be taken in any sequence.
    Term(s) Offered: Spring
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 131 - Beginning Drawing


    Credits - 4 Lecture - 3 Other - 1
    Explores basic perceptual drawing techniques and tools as well as the development of the language of drawing in historical and contemporary contexts. Introduces critical skills for sighting, measuring, designing and constructing in drawing. This is the first course in a three-course sequence.
    Term(s) Offered: Fall
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 132 - Beginning Drawing


    Credits - 4 Lecture - 3 Other - 1
    Introduces intermediate drawing techniques and tools as well as the development of the language of drawing in historical and contemporary contexts. Promotes critical skills for sighting, measuring, designing and constructing in drawing. This is the second course in a three-course sequence.
    Term(s) Offered: Winter
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 133 - Beginning Drawing


    Credits - 4 Lecture - 3 Other - 1
    Builds upon intermediate drawing techniques and tools as well as the development of the language of drawing in historical and contemporary contexts. Applies critical skills for sighting, measuring, designing and constructing in drawing. This is the third course in a three-course sequence.
    Term(s) Offered: Spring
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 154 - Beginning Ceramic Pottery


    Credits - 4 Lecture - 3 Other - 1
    Introduction to the materials, methods and techniques of pottery design and construction.
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 155 - Beginning Ceramic Pottery


    Credits - 4 Lecture - 3 Other - 1
    An introduction to the materials, methods and techniques of pottery design and construction.
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 156 - Beginning Ceramic Pottery


    Credits - 4 Lecture - 3 Other - 1
    An introduction to the materials, methods and techniques of pottery design and construction.
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 184 - Beginning Watercolor


    Credits - 4 Lecture - 3 Other - 1
    Methods, materials, composition, and techniques using aqueous media.
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 185 - Watercolor


    Credits - 4 Lecture - 3 Other - 1
    A course featuring methods, materials, composition, and techniques using aqueous media.
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 186 - Watercolor


    Credits - 4 Lecture - 3 Other - 1
    A course featuring methods, materials, composition, and techniques using aqueous media.
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 198 - Special Studies


    Credits - 1-3
    Individualized study in areas not considered in other courses to meet special interest or program requirements.
    Recommended preparation: Prior study and instructor approval.
    Course is repeatable up to 2 times.(2-6 credits total.) Complete a term project approved by the instructor.
    Course Designation: Elective - A transferable course that can be used to fulfill undesignated elective requirements in the associate’s degree programs.
  
  • ART 204 - History of Western Art


    Credits - 4 Lecture - 4
    This course is a historical survey of the visual arts in the western world from prehistoric times up to the High Renaissance, including ancient Near East, Egypt, Greece, Rome, Early Christian and Byzantine eras, Romanesque, Gothic, Early and High Renaissance.
    Prerequisite: WR 060  or Placement, WR 115  strongly recommended.
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 205 - History of Western Art


    Credits - 4 Lecture - 4
    This course is a historical survey of the visual arts in the western world (predominantly Europe) from the 16th Century through the 20th Century. It will include the following styles and developments: Mannerism, 16th Century Painting and Printmaking in Northern Europe, Baroque, Rococo, Neoclassicism, Romanticism, Realism, Impressionism, Post-Impressionism, Fauvism, Expressionism, Cubism, Futurism, Dada, Surrealism, Abstract Expressionism and other 20th century developments.
    Prerequisite: WR 060  or Placement, WR 115  strongly recommended.
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 231 - Intermediate Drawing


    Credits - 4 Lecture - 3 Other - 1
    Deepens basic perceptual drawing techniques and tools as well as the understanding of the language of drawing in historical and contemporary contexts. Further develops critical skills for sighting, measuring, designing and constructing in drawing. This is the first in a three-course sequence.
    Term(s) Offered: Fall
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 232 - Intermediate Drawing


    Credits - 4 Lecture - 3 Other - 1
    Further deepens basic perceptual drawing techniques and tools as well as the understanding of the language of drawing in historical and contemporary contexts. Further develops critical skills for sighting, measuring, designing and constructing in drawing. This is the second in a three-course sequence.
    Term(s) Offered: Winter
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 233 - Intermediate Drawing


    Credits - 4 Lecture - 3 Other - 1
    Further deepens basic perceptual drawing techniques and tools as well as the understanding of the language of drawing in historical and contemporary contexts. Further develops critical skills for sighting, measuring, designing and constructing in drawing. This is the third course in a three-course sequence.
    Term(s) Offered: Spring
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 254 - Intermediate Ceramic Pottery


    Credits - 4 Lecture - 3 Other - 1
    A continuation of ART 154  in the introduction to the materials, methods and techniques of pottery design and construction at the intermediate level.
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 255 - Intermediate Ceramic Pottery


    Credits - 4 Lecture - 3 Other - 1
    A non-sequential continuation of ART 155  in the introduction to the materials, methods and techniques of pottery design and construction at the intermediate level.
    Prerequisite: ART 154  
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 256 - Intermediate Ceramic Pottery


    Credits - 4 Lecture - 3 Other - 1
    A non-sequential continuation of ART 156  in the introduction to the materials, methods and techniques of pottery design and construction at the intermediate level.
    Prerequisite: ART 154  or ART 155  
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 261 - Beginning Photography


    Credits - 4 Lecture - 3 Other - 1
    Black and white photographic processes and techniques; development of camera and darkroom skills; seeing photographically.
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 262 - Digital Photo Imaging


    Credits - 4 Lecture - 3 Other - 1
    Studio course introducing the concepts, techniques, practices, aesthetics, and ethics of photographic imaging and image making with digital technologies. Includes experimentation with the camera and the digital darkroom. Methods include capturing, color correcting and balancing, retouching, layering, masking, composition, and output for printing or digital media presentation.
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 263 - Beginning Photography


    Credits - 4 Lecture - 3 Other - 1
    A non-sequential course continuing to introduce and reinforce the concepts, techniques, practices, aesthetics, and ethics of photographic imaging and image making with digital technologies. Includes experimentation with the camera and the digital darkroom. Methods include capturing, color correcting and balancing, retouching, layering, masking, composition, and output for printing or digital media presentation.
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 264 - Intermediate Photography


    Credits - 4 Lecture - 3 Other - 1
    Intermediate black and white photographic processes and techniques; further development of camera and darkroom skills; seeing photographically.
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 265 - Intermediate Photography


    Credits - 4 Lecture - 3 Other - 1
    A non-sequential course continuing the intermediate black and white photographic processes and techniques; further development of camera and darkroom skills; seeing photographically.
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 266 - Intermediate Photography


    Credits - 4 Lecture - 3 Other - 1
    A non-sequential course continuing the intermediate black and white photographic processes and techniques; further development of camera and darkroom skills; seeing photographically. Instructor approval required.
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 276 - Beginning Sculpture


    Credits - 4 Lecture - 3 Other - 1
    A hands-on introduction to studio sculpture through exploring various styles, techniques, and materials of three-dimensional artistic creation. Experiences also include mold making and casting.
    Term(s) Offered: Fall
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 277 - Beginning Sculpture


    Credits - 4 Lecture - 3 Other - 1
    A non-sequential course featuring the hands-on introduction to studio sculpture through exploring various styles, techniques, and materials of three-dimensional artistic creation. Experiences also include mold making and casting.
    Term(s) Offered: Winter
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
  
  • ART 278 - Beginning Sculpture


    Credits - 4 Lecture - 3 Other - 1
    A non-sequential course featuring the hands-on introduction to studio sculpture through exploring various styles, techniques, and materials of three-dimensional artistic creation. Experiences also include mold making and casting.
    Term(s) Offered: Spring
    Course Designation: Discipline Studies - A transferable course that meets distribution (group) requirements in the associate of arts Oregon transfer (A.A.O.T.) degree and the associate of science (A.S.) degree. Note: Courses meeting distribution requirements may always be used as electives in the transfer degrees.
 

Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8